Model 833-BR-044

Product Highlight

The Thermodynamic Principles of LPA

Most current refrigeration and air conditioning systems waste 20% to 40% of

Model LPA® 860-SS-075


860-SS-075-B | 4 to 30 GPM | Max Head 50 feet PS

Model 833-BR-044


833-IND | 2 to 20 GPM | Max Head 40 Feet

  • PS 640 psi / 44.2 bar
  • PT 920 psi / 63.4 bar
  • TS Min -22°F / -30°C
  • TS Max 160°F / +72°C
  • Motor Power .33hp
  • Inlet ODF Copper 1-5/8″
  • Outlet ODF Copper 7/8″
  • Voltage 208-230 /460
  • Ampere 1.1-1 / 0.5
  • Phase 3PH
  • Frequency 50 / 60Hz
  • Thermal Overload



REFRIGERANTS: (Fluid Type /GAS GROUP 1&2 /UL Classified)

Co2 R-290 R-134a R-401a R-401b R-401c R-402a R-402b R-404A R-407A R407b R-407c R-408a R-409a R-410A R-500 R-507

OUTDOOR PROTECTION IP54 | Altitude 2000M | Corrosive & Polluting Substance Class 4C2 | Vibration & Shock Class 4S2 | Presence of Dust Class 4S2 | Corrosion Protection Level ClassIP43B

MAINTENANCE: Maintenance free, no service required.

Manufactured to: DIR 97/23/EC “CE” CAT A1 / UL Recognized \ Shipping Weight 55 lb’s | Dimensions L25″ x W16″ x H16″ \ Component Weight 42lb | Dimensions L17″ x W14″ x H10″

Mechanical Life Wet End Assembly +20 years | Mechanical life Impeller +100,000 continuous hrs | Mechanical Endurance +300,000 cycles

6 Responses to “ Model 833-BR-044 ”

  1. Andi Pintoro says:

    I’m looking for a pump that can use for Novec 649 and R 245fa (liquid). Please inform me as soon as possible, thank’s.

    Best Regards,
    Andi Pintoro

  2. yavuz okumuş says:


    is this this pump working with R134a or R410a ?

    many thanks yavuz..

  3. HY-SAVE Engineering says:

    Good day,

    Yes is the answer to that, including Propane and Co2.
    Please use our contact form for further information.
    HY-SAVE Engineering

  4. HY-SAVE Engineering says:

    Our bronze series is limited to 640 psi due to the 1-5/8″ ODF inlet copper tube.

  5. Leon Gouws says:

    Do you have a model that can take screw on fittings and not just copper pipe?

  6. admin says:


    Any screw on fittings would tend to increase the leak risk factor, however, we can take a look at it if needs be.

NEED HELP? Click here for online help